Monessen-hearth Magnum Unvented Vent-Free Fireboxes MCUF42D SERIES User Manual download pdf (Page 13)

26D4720 13

CANOPY INSTALLATION

INSTALLING CANOPY

A canopy is furnished with each firebox and MUST be installed for safe operation. See Figure 15.

1. Remove the three (3) screws from the top front frame assembly. Also remove the two (2) screws on the side frames.

See Figure 15.

2. Align the canopy with the holes in the top frame.

3. Replace the screws previously removed.

4. Tighten side screws. Make sure the canopy is level and

secure.

The firebox canopy must not be

modiﬁ ed or replaced with a canopy

that may be provided with the unvented

decorative room heater.

WARNING

Close ﬁ replace screen panel before

operating a decorative type unvented

room heater.

WARNING

Figure 15 - Installing Canopy

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Monessen-hearth Magnum Unvented Vent-Free Fireboxes MCUF42D SERIES User Manual Page 13