Monessen Hearth WIDEVIEW WDV500 Operations Instructions download pdf (Page 37)

78D0011

WDV Series Gas Fireplace



1. Press the ON/up button to turn on the replace. The

ame icon on the LCD displays

High.

. Press the OFF/down button to

decrease the ame height and

turn off the replace. When the

OFF/down button is pressed

for three times, the ame icon

changes form High to Medium,

to Low, then to Off.

3. If the OFF button is held for

more than 3 seconds at any

ame height, the replace will

be turned off and the ame icon

disappears.

4. Sliding up and down on the ar-

row buttons can also turn on or turn off the replace.

5. If the replace is shut off using the above methods in 3

and 4, all the settings will be remembered and will be

resumed next time the replace is turned on (Memory

Off).



Figure 47

Press the TIMER button to enter

timer mode. The replace will stay

on for a period of time as specied

by the timer and then be shut off

by the transmitter when the timer

counts down to zero.

1. When the TIMER button is

pressed, the Set Time appears

in the frame of the button and

ashes.

. Use ON/up and OFF/down to

increase or decrease the Set

Time in 15 min. increments, between 0:00 to 6:00.

Sliding up and down on the arrow buttons will increase

or decrease the Set Time in 1 hour increments.

3. Push the TIMER button again to conrm the Set Time,

the transmitter sends an ON signal to turn on the re-

place.

4. The ashing stops and the ON/up and OFF/down but-

tons become ame height controller again. The ame

height will then stay as set up by the ON/up and OFF/

down buttons.

5. The TIMER button can be used when the transmit-

ter is in Manual Mode or in Thermostat Mode. In both

modes, the replace will be shut down completely

when the timer counts down to zero.

6. To exit Timer Mode,

a. Push and hold the TIMER button for 3 seconds Or

b. Use the OFF/down buttons to decrease the Set

Time to zero Or

c. Slide down on the arrow buttons to exit TIMER

mode and shut off the replace.



Figure 48

 The Command Center

buttons will disable when ther-

mostat is being used.

Press the THERMO button to

set the transmitter in thermostat

mode. The transmitter will au-

tomatically turn on the replace

when the room temperature is

below the set temperature and

turn off the appliance when the

room temperature is above the

set temperature within one de-

gree.

1. When the THERMO button is pressed, the Set temper-

ature appears in the frame of the button and ashes.

. Use ON/up and OFF/down to increase or decrease

the Set temperature in 1 degree increments, between

45 degrees and 90 degrees. Slide up and down on the

arrow buttons will increase or decrease the Set Tem-

perature in 10 degrees increments.

3. Press the THERMO button again to conrm the Set

Temperature. The transmitter will send out an On

signal or an Off signal depending on the relationship

between the Set temperature and the Room tempera-

ture.

4. The ashing stops and the ON/up and OFF/down but-

tons become ame height controller again. The ame

height will then stay as set up by the ON/up and OFF/

down buttons.

5. To exit Thermostat Mode:

a. push and hold the THERMO buttons for 3 sec-

onds or

b. slide down on the arrow buttons to exit Thermo-

stat mode and shut off the replace.

 



   



Figure 49

Press and hold the THER-

MO button and the ON/UP

button at the same time

for 3 seconds to toggle

between Smart Mode

thermostat and the regu-

lar Thermostat Mode. The

icon “Smart Mode” will ap-

pear under the Set Tem-

perature. The transmitter

will automatically adjust

the ame height accord-

FP2653

thermo mode

Figure 48

FP2652

Timer mode

Figure 47

FP2651

Manual mode

Figure 46

FP2654

smart mode

Smart

Mode

Icon

Figure 49

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Comments to this Manuals

No comments

Monessen Hearth WIDEVIEW WDV500 Operations Instructions Page 37

Comments to this Manuals

Related products and manuals for Fireplaces Monessen Hearth WIDEVIEW WDV500