Monessen Hearth GPF36 Operations Instructions Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
43D0121 23
FOR USE OF OPTIONAL AK-4 OUTSIDE AIR KIT
The use of outside air for combustion is optional unless required by building codes. It is only necessary to supply outside
combustion air to one side of the replace. Use the model AK4 combustion air kit.
MODEL AK-4 COMBUSTION AIR ASSEMBLY
1. Remove the cover plate from the 4" outlet opening location on the left or
right outside of the replace.
2. Place the insulation ring between the AK-4 starting collar and fire
-
place wall.
3. Place the starting collar (4") into the hole on the side of replace. Fasten it in place with the four sheet metal screws
provided.
See Figures 33 and 34.
Note: The air starting collar extends through the fireplace outer wrap. When the air starting collar is securely
attached, it will form a seal against the fireplace wall.
4. Attach outside duct to starting collar with duct clamp or screws.
See Figure 34.
DO NOT remove the cover
if the outside air will not be
connected.
WARNING
Figure 33 - Attaching Outside Air Starting Collar and
Insulation Ring to Left Side of Fireplace
Figure 34 - Attaching Outside Duct
to Starting Collar
Insulation Ring
AK-4 Starting
Collar
Sheet Meal
Screws
Left Side of
Fireplace
Shorter End
of Air Starting
Collar
Air Starting
Collar
Duct
Screws
Left Side of
Fireplace
5. Cut a 6-inch diameter opening for model AK-4 in the outside
wall covering where the outside vent is to be located. See
Figure 35.
6. Select and cut a piece of duct long enough to attach to the
replace and stick out at least 3" beyond the face of the wall
to which the AK-4 inlet air vent will be attached. See Figure
34.
Figure 35 - Combustion Air Assembly for
Model No. AK-4
Nail
Holes
Use FP-4 U duct for maximum efficiency
and safety. Do not use a combustible duct.
Always use UL Listed Class 0 or 1 duct
material.
WARNING
6" Diameter
Hole
Duct
Extending
3"min.
AK-4 Inlet
Air Vent
Screw
Screws
Continued
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments